Panasonic FP-X0 L14R User Manual page 5

Difference in Specifications Between FP-X0 Models
The following tables show the main differences between each FP-X0 models. Check those differences
thoroughly before use.
Comparison of hardware specifications
Item
Service power supply for
input
Control
No. of
unit
controllable
I/O points
Expansion
unit
Analog input
Clock/calendar function
(Realtime clock)
Backup battery
Backup of operaiton
memory to F-ROM when
power is cut off
Comparison of communication interfaces
Item
Interface
Tool
port
Usable function
Interface
COM
port
Usable function
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
L14
None 24V DC 0.3 A
14 points 30 points
DC input: 8 DC input: 16
Relay output: 4 Relay output: 10
Tr. output: 2 Tr. output: 4
Cannot be connected.
None
None
Cannot be installed.
Counter: 6 points,
Internal relay: 80 points,
Data register: 300 words
L14 / L30 / L40 / L60
RS232C
MEWTOCOL-slave
-
(L14/L30: 118 bytes/frame)
(L40/L60: 2k bytes/frame)
-
General-purpose serial
-
communication
Modem Initialization
-
None
None
L30 L40
24V DC 0.3 A
40 points
DC input: 24
Relay output: 12
Tr. output: 4
Max. 3 units
(Max. 90 points for expansion units)
Analog input x 2 points
One of the followings can be input
to the terminal block of the control
unit or they can be connected in
combination.
(1) Connect potentiometer.
(2) Connect thermister.
(3) Input voltage 0 to 10V.
Built in
Can be installed.
(1) Operation memory can be set
whether to be held or not by system
registers.
(2) Clock/calendar (realtime clock)
function can be used.
Counter: 16 points,
Internal relay: 128 points,
Data register: 302 words
RS232C
MEWTOCOL-slave
-
(2k bytes/frame)
General-purpose serial
-
communication
Modem Initialization
-
RS485
MEWTOCOL-(master/slave)
-
(2k bytes/frame)
General-purpose communication
-
MODBUS RTU (master/slave)
-
PLC link
-
Modem initialization
-
L60
24V DC 0.3 A
60 points
DC input: 32
Relay output: 24
Tr. output: 4
L40M / L60M