Diagnostic Start - Cisco Catalyst 3560-X Command Reference Manual

diagnostic start

diagnostic start
Syntax Description
Defaults
Command Modes
Command History
Usage Guidelines
Catalyst 3750-X and 3560-X Switch Command Reference
2-150
Downloaded from www.Manualslib.com
Use the diagnostic start privileged EXEC command to run an online diagnostic test.
diagnostic start switch number test {name | test-id | test-id-range | all | basic | non-disruptive}
switch number Specify the switch number, which is the stack member number. If the
switch is a standalone switch, the switch number is 1. If the switch is in a
stack, the range is 1 to 9, depending on the switch member numbers in the
stack.
This keyword is supported only on on stacking-capable switches.
test Specify the tests to run.
name Specify the name of a test. For more information, see the "Usage
Guidelines" section.
test-id Specify the ID number of a test. The range is from 1 to 7. For more
information, see the "Usage Guidelines" section.
test-id-range Specify more than one test with the range of test ID numbers. For more
information, see the "Usage Guidelines" section.
all Specify all the diagnostic tests.
basic Specify the basic on-demand diagnostic tests.
non-disruptive Specify the nondisruptive health-monitoring tests.
This command has no default setting.
Privileged EXEC
Release Modification
12.2(53)SE2 This command was introduced.
The switch supports these tests:
ID Test Name [On-Demand Test Attributes]
--- -------------------------------------------
1 TestPortAsicStackPortLoopback
2 TestPortAsicLoopback
3 TestPortAsicCam
4 TestPortAsicRingLoopback
5 TestMicRingLoopback
6 TestPortAsicMem
7 TestInlinePwrCtlr
--- -------------------------------------------
manuals search engine
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
[B*N****]
[B*D*R**]
[B*D*R**]
[B*D*R**]
[B*D*R**]
[B*D*R**]
[B*D*R**]
OL-21522-02