Cluster Run - Cisco Catalyst 3560-X Command Reference Manual

cluster run

cluster run
Syntax Description
Defaults
Command Modes
Command History
Usage Guidelines
Examples
Related Commands
Catalyst 3750-X and 3560-X Switch Command Reference
2-126
Downloaded from www.Manualslib.com
Use the cluster run global configuration command to enable clustering on a switch. Use the no form of
this command to disable clustering on a switch.
cluster run
no cluster run
This command has no arguments or keywords.
Clustering is enabled on all switches.
Global configuration
Release Modification
12.2(53)SE2 This command was introduced.
When you enter the no cluster run command on a cluster command switch or cluster command switch
stack, the cluster command switch is disabled. Clustering is disabled, and the switch cannot become a
candidate switch.
When you enter the no cluster run command on a cluster member switch, it is removed from the cluster.
Clustering is disabled, and the switch cannot become a candidate switch.
When you enter the no cluster run command on a switch that is not part of a cluster, clustering is
disabled on this switch. This switch cannot then become a candidate switch.
This example shows how to disable clustering on the cluster command switch:
Switch(config)# no cluster run
You can verify your setting by entering the show cluster privileged EXEC command.
Command Description
show cluster Displays the cluster status and a summary of the cluster to which the switch
belongs.
manuals search engine
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
OL-21522-02