Boot Private-Config-File - Cisco Catalyst 3560-X Command Reference Manual

boot private-config-file

boot private-config-file
Syntax Description
Defaults
Command Modes
Command History
Usage Guidelines
Examples
Related Commands
Catalyst 3750-X and 3560-X Switch Command Reference
2-76
Downloaded from www.Manualslib.com
Use the boot private-config-file global configuration command on a standalone switch to specify the
filename that Cisco IOS uses to read and write a nonvolatile copy of the private configuration. Use the
no form of this command to return to the default setting.
boot private-config-file filename
no boot private-config-file
filename The name of the private configuration file.
The default configuration file is private-config.
Global configuration
Release Modification
12.2(53)SE2 This command was introduced.
This command works properly only from a standalone switch in a stack.
Filenames are case sensitive.
This example shows how to specify the name of the private configuration file to be pconfig:
Switch(config)# boot private-config-file pconfig
Command Description
show boot Displays the settings of the boot environment variables.
manuals search engine
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
OL-21522-02