Show Controllers Tcam - Cisco ME 3400 Command Reference Manual

show controllers tcam

show controllers tcam
Use the show controllers tcam privileged EXEC command to display the state of the registers for all
ternary content addressable memory (TCAM) in the system and for all TCAM interface ASICs that are
CAM controllers.
Syntax Description asic
number
detail
| begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.2(25)EX
Usage Guidelines This display provides information that might be useful for Cisco technical support representatives
troubleshooting the switch.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show controllers tcam command:
Switch# show controllers tcam
------------------------------------------------------------------------
TCAM-0 Registers
------------------------------------------------------------------------
REV:
SIZE:
ID:
CCR:
RPID0:
RPID1:
RPID2:
RPID3:
Cisco ME 3400 Ethernet Access Switch Command Reference
2-410
show controllers tcam [asic [number]] [detail] [ | {begin | exclude | include} expression]
(Optional) Display port ASIC TCAM information.
(Optional) Display information for the specified port ASIC number. The range is
from 0 to 15.
(Optional) Display detailed TCAM register information.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
00B30103
00080040
00000000
00000000_F0000020
00000000_00000000
00000000_00000000
00000000_00000000
00000000_00000000
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
OL-9640-10