2
2.1
Units – smart.Turn units
Units menu item
The Units» menu item contains the unit calls grouped by the type
of machining operation. Select the Units» menu item to call the
following menu items:
Roughing
Recessg
Drilling (C axis and Y axis)
Finishing
Thread
Millg (C axis and Y axis)
Spec (special operations)
Refer to your machine manual.
Your machine tool builder can also provide his own units.
Select the Spec menu item to call these functions.
smart.Turn unit
A unit describes a complete working block.
The unit includes:
Tool call
Technology data
Cycle call
Approach and departure strategies
Global data
Safety clearance
These parameters are summarized in a dialog—simply and clearly.
Unit forms
The unit dialog is divided into fillable forms and the forms are
divided again into groups. You can navigate between the forms and
groups with the smart.Turn keys.
Forms in unit dialogs
Fillable form
Function
Overvw.
Overview form with all necessary settings
Tool
Tool form with tool selection, technological
settings and M functions
Contour
Description or selection of the contour to be
machined
Cycle
Description of the machining operation
Global
View and settings of globally set values
AppDep
Definition of approach and departure behavior
Tool ext
Extended tool settings
78
smart.Turn units | Units – smart.Turn units
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017