TURN PLUS | Automatic working plan generation (AWG) submode
Editing and managing the Machining sequence
TURN PLUS uses the currently active machining sequence. You
can change the Machining sequence and adapt it to your range of
parts.
Opening the Machining sequence:
Select TURN PLUS
Select the Machining sequence
Select Open ...
TURN PLUS opens the selection list with the
machining sequence files
Select the desired file
Saving the Machining sequence:
Select TURN PLUS
Select the Machining sequence
Select Save as...
TURN PLUS opens the selection list with the
machining sequence files
Enter a new file name or overwrite an existing
file
Creating a default machining sequence:
Select TURN PLUS
Select the Machining sequence
Select Save HEIDENHAIN standard as...
TURN PLUS opens the selection list with the
machining sequence files
Enter a file name under which you wish to store
the HEIDENHAIN default machining sequence
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
7
623