Dialogs In Subprogram Calls - HEIDENHAIN CNC PILOT 640 User Manual

DIN/ISO programming | Subprograms

Dialogs in subprogram calls

You can define up to 30 parameter descriptions that precede/follow
the input fields in an external subprogram. The units of measure
are defined using code numbers. Depending on the setting "metric"
or "inches," the control shows the designations (of the units of
measure). When calling external subprograms that contain a
parameter list, parameters not contained in this list are omitted
from the call dialog.
The parameter descriptions can be positioned within the
subprogram as desired. The control searches for subprograms in
the sequence: current project, standard directory and then machine
manufacturer directory.
Parameter descriptions:
[//] – Beginning
[pn=n; s=...] (parameter text max. 25 characters)
pn: Parameter designations (la, lb, ...)
n: Code number for units of measure
0: Non-dimensional
1: mm or inches
2: mm/rev or in./rev
3: mm/min or in./min
4: m/min or ft/min
5: Rev/min
6: Degrees (°)
7: µm or µinch
[//] – End
Example: Dialogs
. . .
[//]
[la=1; s=bar diameter]
[lb=1; s=starting point in Z]
[lc=1; s=chamfer/rounding arc (-/+)]
. . .
[//]
. . .
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
4
485