HEIDENHAIN CNC PILOT 640 User Manual page 81

smart.Turn units | Units – smart.Turn units
Soft keys in the ICP contour form
Opens the selection list of the contours defined in
the program
Shows all contours in the graphics window. Use
the arrow keys for selection
Starts the ICP editor submode. First, enter the
desired contour name in FK
Starts the ICP editor submode with the currently
selected contour
Opens the graphics window for selection of a part
of a contour for NS and NE
Starts the ICP editor submode. First, enter the
desired contour name in FK
Starts the ICP editor submode. First, enter the
desired contour name in FK
Navigating between contours
When working with multiple contour groups, you can press the
Contour reference soft key to select the correct contour. The
control shows the number of the Contour group and, if applicable,
the name of the Auxiliary contour at the top left in the graphics
window.
Navigation keys
Switches to the next or previous contour
(Contour group/Workpiece blank/Auxiliary
contour/Finished part)
Switches to the next contour element
Reduces the displayed workpiece (zoom –)
Magnifies the displayed workpiece (zoom +)
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
2
81