HEIDENHAIN CNC PILOT 640 User Manual page 243

DIN/ISO programming | Programming in ISO Mode
Remember the following when converting
the CNC PILOT 4290:
Tool call (T commands of the TURRET section):
T commands containing a reference to the tool database are
left unchanged (example: T1 ID"342-300.1")
T commands containing tool data cannot be converted
Variable programming: Variable accesses to tool data, machine
dimensions, D compensation values, parameter data and events
cannot be converted. These program sequences have to be
adapted
M functions are left unchanged
Names of external subprograms:
subprogram is called, the converter prefixes CONV_... to the
name
If the DIN/ISO program contains nonconvertible
elements, the corresponding NC block is saved as a
comment. The word
of this comment. Depending on the situation, the
nonconvertible command is taken into the comment
line, or the nonconvertible NC block follows the
comment.
Danger of collision!
Converted NC programs may have incorrectly converted
contents (machine-dependent) or nonconvertible contents.
Danger of collision during machining!
Adapt converted NC programs to the current control
Check the NC program using the verification graphics in the
Simulation submode
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
DIN/ISOprograms of
When an external
WARNUNG is inserted in front
NOTICE
4
243