Tool Positioning In Y Axis; Rapid Traverse G0; Approaching The Tool Change Pointg14 - HEIDENHAIN CNC PILOT 640 User Manual

6
6.5

Tool positioning in Y axis

Rapid traverse G0

G0 moves the tool at rapid traverse along the shortest path to the
Target point X, Y, Z.
Parameters:
X: Diameter – target point
Y: Length – target point
Z: Length – target point
Programming:
X, Y and Z absolute, incremental or modal
If more axes are available on your machine, additional
input parameters will be displayed, e.g. parameter B for
the B axis.

Approaching the Tool change pointG14

G14 moves the slide at rapid traverse to the Tool change point.
In setup mode, define permanent coordinates for the tool change
position.
Parameters:
Q: Order (default: 0)
0: Simultaneously
1: First X, then Z
2: First Y, then Z, then X
3: Only X
4: Only Z
5: Only Y (machine-dependent)
6: Simultaneous w/ Y (machine-dependent)
If Q = 0-4, the Y axis does not move.
588
DIN/ISO Programming for the Y axis | Tool positioning in Y axis
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017