HEIDENHAIN CNC PILOT 640 User Manual page 627

TURN PLUS | Automatic working plan generation (AWG) submode
Machining sequence Contour recessing
Main mach. Anc. mach.
operation operation
Contour recessing
All
Longitudinal
machining
Longitudinal
machining
Transverse
machining
Transverse
machining
Recessing and Contour recessing are used alternatively.
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
Machining location Design
Contour
are determined and machined according to the
inward copying angle EKW
Sequence: First outside, then inside machining
Machining parameter:
finished parts
– Radial/axial machining - outside and inside
Shaft machining: Axial machining on the outside
is executed on the front and back
Extnl. Radial machining – Extnl.
Internal Radial machining – Internal
Outside/front Axial machining – Extnl.
Inside/front Axial machining – Internal
analysis: Recess areas (recesses)
1 Global parameters for
7
627