HEIDENHAIN CNC PILOT 640 User Manual page 134

2
ICP deburring, C axis, face unit
The unit deburs a single hole or a hole pattern on the face. Using
ICP, you define the positions of the holes as well as further details.
Unit name: G75_EN_ICP_C / cycle: G75
Further information:
Contour form:
FK: Finished part contour – name of the contour to be
machined
NS: Starting block no. of contour – beginning of contour
section
B: Milling depth (default: countersinking depth from the contour
definition)
Cycle form:
H: Mill cutting direction
0: Up-cut
1: Climb
I: Contour-parallel oversize
K: Infeed-direction oversize
RB: Return plane (default: retract to starting position or to
safety clearance; diameter value with radial holes and holes in
the YZ plane)
Further forms:
Further information:
Access to the technology database:
Machining operation: Deburring
Affected parameters: F, S
134
"Bore milling G75", Page 381
"smart.Turn unit", Page 78
smart.Turn units | Units – Drilling in C axis
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017