Awg Control Graphic; Setting The Awg Control Graphic - HEIDENHAIN CNC PILOT 640 User Manual

TURN PLUS | AWG control graphic
7.3

AWG control graphic

When you create a program with the AWG submode, the
programmed blank and finished part are displayed in the simulation
window and in addition, all machining steps are simulated
successively. The workpiece blank contour is updated during
machining.

Setting the AWG control graphic

When you start the automatic program creation with the AWG
soft key, the control automatically opens the AWG control graphic.
The simulation starts dialogs in which you get machining and tool
information. After you have simulated the machining process, you
can close the graphics window with the Back soft key. The Save
as dialog box opens once you exit the TURN PLUS menu with the
Back soft key. The name of the opened program is displayed in the
File name dialog field. If you do not enter another file name, the
opened program will be overwritten. Alternatively, you can save the
machining operation in another program.
The AWG control graphic is indicated in the soft-key symbol by a
contour outlined in red.
You can set the display of the tool paths and the simulation mode
in the same way as in Simulation submode.
Further information: User's Manual
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
7
635