HEIDENHAIN CNC PILOT 640 User Manual page 557

Touch probe cycles | Circular measurement
F: Measuring feed – feed rate for probing (if nothing is entered,
the measuring feed rate from the touch probe table is used)
If the entered measuring feed rate F is higher than the one in
the touch probe table, the feed rate is reduced to the value from
the touch probe table.
Q: Tool orientation (machine-dependent)
Orient the touch probe in the programmed probing direction
before each probing operation.
NF: Variable no. result – number of the first global variable in
which the result is saved (no input: Variable 810)
The second measurement result is saved automatically to the
next consecutive number.
P: PRINT outputs
0: OFF – do not display measuring results
1: ON – display measuring results on the screen
H: INPUT instead of measure
0: Standard – obtain measured values by probing
1: PC test – simulate touch probe cycle on the programming
station
AN: Log no. – save measurement results in the
TNC:\table\messpro.mep table (line numbers 0-99)
The table can be expanded if necessary.
Example: G785 Circular measurement
. . .
MACHINING
N3 G785 R0 BR0 K2 C0 RC60 I0 J0 Q0 P0 H0
. . .
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
5
557