HEIDENHAIN CNC PILOT 640 User Manual page 235

DIN/ISO programming | Programming in ISO Mode
references: When editing G codes related to the contour
Block
(MACHINING section), load the block references from the displayed
contour.
Load the block reference:
Place the cursor in the input box (NS)
Switch to the contour display
Place the cursor on the desired contour element.
Switch to NE
Place the cursor on the desired contour element.
Press the Take over soft key to return to the
dialog
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
4
235