Engraving, Xy Plane Unit - HEIDENHAIN CNC PILOT 640 User Manual

smart.Turn units for the Y axis | Units – Milling in Y axis

Engraving, XY plane unit

The unit engraves character strings aligned linearly in the XY
plane. Diacritics and special characters that you cannot enter in
smart.Turn operating mode can be defined, character by character,
in NF. If you program Q = 1 (Continue from last text) tool change
and pre-positioning are suppressed. The technological data of the
previous engraving cycle apply.
Unit name: G803_GRA_Y_STIRN / cycle: G803
Further information: "Engraving in XY plane G803", Page 605
Position form:
X, Y: Start point
Z: Final point – Z position, infeed depth during milling
RB: Return plane
APP: Type of approach
DEP: Type of departure
Cycle form:
TXT: Text to be engraved
NF: Char. no. – ASCII code of the character to be engraved
H: Font height
E: Distance factor (calculation: see figure)
The distance between the characters is calculated according to
the following formula: H / 6 * E
W: Inclinat. ang. of the character string
FZ: Plunging feed rate factor (plunging feed rate = current feed
rate * FZ)
Q: Continue from last text
0 (No): Engraving starts at the starting point
1 (Yes): Engraving starts at the tool position
O: Mirror writing
0 (No): Engraving is not mirrored
1 (Yes): Engraving is mirrored (mirror writing)
Further forms:
Further information: "smart.Turn unit", Page 78
Access to the technology database:
Machining operation: Engraving
Affected parameters: F, S
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
3
221