Icp Boring/Countersinking, C Axis Unit - HEIDENHAIN CNC PILOT 640 User Manual

2

ICP boring/countersinking, C axis unit

The unit machines a single hole or a hole pattern on the face or
lateral surface. Using ICP, you define the hole positions as well as
further details for boring or countersinking.
Unit name: G72_ICP_C / cycle: G72
Further information:
Pattern form:
FK: No. of ICP finished part – name of contour to be machined
NS: Starting block no. of contour – beginning of contour
section
Cycle form:
E: Period of dwell at end of hole (default: 0)
D: Retraction type
0: Rapid traverse
1: Feed rate
RB: Return plane (default: back to start position)
Further forms:
Further information:
Access to the technology database:
Machining operation: Drilling
Affected parameters: F, S
132
"Boring/cnt-sink G72", Page 375
"smart.Turn unit", Page 78
smart.Turn units | Units – Drilling in C axis
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017