Engraving In Yz Plane G804 - HEIDENHAIN CNC PILOT 640 User Manual

Smart.turn and din programming
Table of Contents

Advertisement

6

Engraving in YZ plane G804

G804 engraves character strings aligned linearly in the YZ plane.
Further information:
The cycles start engraving from the starting position or from the
current position, if no starting position is defined.
Example: If a character string is engraved with several calls, define
the starting position in the first call. All other calls are programmed
without a starting position.
Parameters:
Y, Z: Start point
X: Final point – X position, infeed depth during milling (diameter
value)
RB: Return plane – X position retracted to for positioning
ID: Text to be engraved
NF: Char. no. – ASCII code of the character to be engraved
W: Inclinat. ang. of the character string
H: Font height
E: Distance factor (calculation: see figure)
The distance between the characters is calculated according to
the following formula: H / 6 * E
F: Plunging feed rate factor (plunging feed rate = current feed
rate * F)
O: Mirror writing
0 (No): Engraving is not mirrored
1 (Yes): Engraving is mirrored (mirror writing)
606
DIN/ISO Programming for the Y axis | Milling cycles for the Y axis
"Character sets", Page 433
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Manualplus 620

Table of Contents