HEIDENHAIN CNC PILOT 640 User Manual page 136

2
ICP deburring, C axis, lateral surface unit
The unit deburs a single hole or a hole pattern on the lateral
surface. Using ICP, you define the positions of the holes as well as
further details.
This cycle produces oval contours on the lateral surface,
and not circles.
Circles are machined when the Y axis is used.
Further information:
Page 207
Unit name: G75_EN_ICP_C_MANT / cycle: G75
Further information:
Contour form:
FK: Finished part contour – name of the contour to be
machined
NS: Starting block no. of contour – beginning of contour
section
B: Milling depth (default: countersinking depth from the contour
definition)
Cycle form:
H: Mill cutting direction
0: Up-cut
1: Climb
I: Contour-parallel oversize
K: Infeed-direction oversize
RB: Return plane (default: retract to starting position or to
safety clearance; diameter value with radial holes and holes in
the YZ plane)
Further forms:
Further information:
Access to the technology database:
Machining operation: Deburring
Affected parameters: F, S
136
"ICP bore milling, Y axis units",
"Bore milling G75", Page 381
"smart.Turn unit", Page 78
smart.Turn units | Units – Drilling in C axis
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017