Tilting The Working Plane G16 - HEIDENHAIN CNC PILOT 640 User Manual

DIN/ISO Programming for the Y axis | Working planes

Tilting the working plane G16

G16 executes the following transformations and rotations:
Shifts the coordinate system to the position I, K
Rotates the coordinate system by the Angle B;
Reference pt.: I, K
Shifts, if programmed, the coordinate system by U and W in the
rotated coordinate system
Parameters:
B: Plane angle (reference: positive Z axis)
I: Plane ref. in X (radius)
K: Plane ref. in Z
U: Shift in X
W: Shift in Z
Q: On/Off – enable/disable tilting the working plane
0: Disable tilted working plane function
1: Tilt working plane
2: Restore previous G16 plane
G16 Q0 resets the working plane. The datum and coordinate
system defined before G16 are then in effect again.
G16 Q2 restores the previous G16 plane.
The positive Z axis is the reference axis for the Plane angle B. This
also applies to a mirrored coordinate system.
Please note:
X is the infeed axis in a tilted coordinate system. X
coordinates are entered as diameter coordinates.
Mirroring the coordinate system has no effect on the
reference axis of the tilt angle
tool call)
Other datum shifts are not permitted as long as G16
is active
Example: G16
. . .
MACHINING
. . .
N.. G19
N.. G15 B130
N.. G16 B130 I59 K0 Q1
N.. G1 X.. Z.. Y..
N.. G16 Q0
. . .
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
(B axis angle of the
6
587