DIN/ISO programming | Tool positioning
4.9
Tool positioning
Rapid traverse G0
G0 moves at rapid traverse along the shortest path to the target
point.
Parameters:
X: Diameter
Z: Target point
Programming:
X and Z absolute, incremental or modal
If more axes are available on your machine, additional
input parameters will be displayed, e.g. parameter B for
the B axis.
Rapid traverse in machine coordinates G701
G701 moves at rapid traverse along the shortest path to the target
point.
Parameters:
X: Diameter
Z: Target point
X and Z refer to the machine datum and the slide
reference point.
If more axes are available on your machine, additional
input parameters will be displayed, e.g. parameter B for
the B axis.
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
4
291