HEIDENHAIN CNC PILOT 640 User Manual page 632

7
Machining sequence milling
Main mach.
operation
milling
632
TURN PLUS | Automatic working plan generation (AWG) submode
Anc. mach. Machining location
operation
All –
Area, Contour, Front
Slot milling,
Pocket
Area, Contour, Lateral
Slot milling,
Pocket
Area, Contour, –
Slot milling,
Pocket
Area, Contour, Front
Slot milling,
Pocket
Area, Contour, Lateral
Slot milling,
Pocket
Execution
Contour analysis:
contours
– Milling operation:
Sequence
Linear and circular slots
Open contours
Closed contours (pockets), single surfaces
and centric polygons
Sequence – Location:
Front (also machines Y front)
Lateral surface (also machines Y surface)
– then the elements are machined according to
the sequence of geometrical definition
All milling operations at all machining locations
All milling operations on the front face
All milling operations on the lateral surface
Milling at all machining locations
Milling the end face
Milling on the lateral surface
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
Determining the milling