Help Graphics For Subprogram Calls - HEIDENHAIN CNC PILOT 640 User Manual

4

Help graphics for subprogram calls

With help graphics you illustrate the call parameters of subprograms.
The control places the help graphics to the left next to the dialog box
of the subprogram call.
If you append an underscore _ and the input field name in capital
letters (beginning with L) to the name of the file name, a separate
graphic will be displayed for that input field. If no separate help
graphic exists for an input field, the graphic for the subprogram will
be displayed (if available). In the standard setting, the help window
is displayed only if there is a graphic for the subprogram. Even if you
want to use individual graphics for the address letters, you should
define a graphic for the subprogram.
Graphic format:
BMP , PNG, JPG images
Size 440x320 pixels
You integrate help graphics for subprogram calls as follows:
The subprogram name, entry field name and the appropriate
extension (BMP , PNG, JPG) must be used as file name for the
help graphic.
Transfer the help graphic to the directory: \nc_prog\Pictures
486
DIN/ISO programming | Subprograms
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017