4
Programming notes:
Program a workpiece blank increased by the center
offset in the radius if you are using turning cycles
that are referenced to the workpiece-blank definition
Program the starting point increased by the center
offset in the radius if you are using turning cycles
that are not referenced to the workpiece-blank
definition
Reduce the spindle speed if you increase the center
offset
Reduce the maximum rapid traverse F if you increase
the center offset
Use identical values for the parameter Q when
activating and deactivating the coupling
Programming sequence:
Position the cursor in the MACHINING program section
Program function G727 with H1 (activate coupling)
Program turning cycles
Program function G727 with H0 (deactivate coupling)
Canceling the program run automatically deactivates the
coupling.
456
DIN/ISO programming | Other G codes
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017