6
Hole in YZ plane G380-Geo
G380 defines a hole with countersinking and thread in the YZ
plane.
Parameters:
Y: Center of hole
Z: Center of hole
B: Diameter
P: Depth excluding point
W: Point angle (default: 180°)
R: Sink diam.
U: Sink depth
E: Sink angle
I: Thread diameter
J: Thread depth
K: Start of thread – runout length
F: Thread pitch
V: Direction of thread: (default: 0)
0: Right-hand thread
1: Left-hand thread
A: Angle to X axis (range: –90° < A < 90°)
O: Center. diam.
Linear slot in YZ plane G381-Geo
G381 defines the contour of a linear slot in the YZ plane.
Parameters:
Y: Center of slot
Z: Center of slot
X: Reference diameter
No input: X from section code
X overwrites X from section code
A: Position angle (reference: positive Z axis; default: 0°)
K: Length
B: Breadth
P: Depth/Height (default: P from G308)
580
DIN/ISO Programming for the Y axis | Contours in the YZ plane
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017