DIN/ISO Programming for the Y axis | Contours in the XY plane
Hole in XY plane G370-Geo
G370 defines a hole with countersinking and thread in the XY
plane.
Parameters:
X: Center of hole (radius)
Y: Center of hole
B: Diameter
P: Depth excluding point
W: Point angle (default: 180°)
R: Sink diam.
U: Sink depth
E: Sink angle
I: Thread diameter
J: Thread depth
K: Start of thread – runout length
F: Thread pitch
V: Direction of thread: (default: 0)
0: Right-hand thread
1: Left-hand thread
A: Angle to Z axis – angle of the hole
Front face (range: –90° < A < 90°; default: 0°)
Rear face (range: 90° < A < 270°; default: 180°)
O: Center. diam.
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
6
571