Clear Hardware Rate-Limiter - Cisco Nexus 7000 Series Command Reference Manual

C Commands

clear hardware rate-limiter

To clear rate-limit statistics, use the clear hardware rate-limiter command.
clear hardware rate-limiter {access-list-log| all| copy| layer-2 {l2pt| mcast-snooping| port-security|
storm-control| vpc-low}| layer-3 {control| glean| glean-fast| mtu| multicast {directly-connected|
local-groups| rpf-leak}| ttl}| receive}
Syntax Description
access-list-log
all
copy
layer-2
l2pt
mcast-snooping
port-security
storm-control
vpc-low
layer-3
control
glean
glean-fast
mtu
multicast
directly-connected
Clears rate-limit statistics for access-list log packets.
Clears all rate-limit statistics.
Clears rate-limit statistics for copy packets.
Specifies Layer 2 packet rate limits.
Clears rate-limit statistics for Layer 2 Tunnel Protocol
(L2TP) packets.
Clears rate-limit statistics for Layer 2
multicast-snooping packets.
Clears rate-limit statistics for Layer 2 port-security
packets.
Clears rate-limit statistics for Layer 2 storm-control
packets.
Clears rate-limit statistics for Layer 2 control packets
over the VPC low queue.
Specifies Layer 3 packet rate limits.
Clears rate-limit statistics for Layer 3 control packets.
Clears rate-limit statistics for Layer 3 glean packets.
Clears rate-limit statistics for Layer 3 glean fast-path
packets.
Clears rate-limit statistics for Layer 3 maximum
transmission unit (MTU) packets.
Specifies Layer 3 multicast rate limits.
Clears rate-limit statistics for Layer 3 directly
connected multicast packets.
Cisco Nexus 7000 Series Security Command Reference
clear hardware rate-limiter
81