Clear Eou - Cisco Nexus 7000 Series Command Reference Manual

C Commands

clear eou

To clear Extensible Authentication Protocol over User Datagram Protocol (EAPoUDP) sessions, use the clear
eou command.
clear eou {all| authentication {clientless| eap| static}| interface ethernet slot / port| ip-address ipv4-address|
mac-address mac-address| posturetoken type}
Syntax Description
all
authentication
clientless
eap
static
interface ethernet slot/port
ip-address ipv4-address
mac-address mac-address
posturetoken type
Command Default
None
Command Modes
Any command mode
Command History
Release
4.0(1)
Usage Guidelines
You must enable EAPoUDP by using the feature eou command before using the clear eou command.
This command does not require a license.
Specifies all EAPoUDP sessions.
Specifies EAPoUDP authentication.
Specifies sessions authenticated using clientless
posture validation.
Specifies sessions authenticated using EAPoUDP.
Specifies sessions authenticated using statically
configured exception lists.
Specifies an interface.
Specifies an IPv4 address. in the A.B.C.D format.
Specifies a MAC address.
Specifies a posture token name.
Modification
This command was introduced.
Cisco Nexus 7000 Series Security Command Reference
clear eou
79