Show Cts Role-Based Sgt-Map - Cisco Nexus 7000 Series Command Reference Manual

show cts role-based sgt-map

show cts role-based sgt-map
To display the global Cisco TrustSec Security Group Tag (SGT) mapping configuration, use the show cts
role-based sgt-map command.
show cts role-based sgt-map [summary| sxp peer peer-ipv4-addr| vlan vlan-id| vrf vrf-name]
Syntax Description
summary
sxp peer peer-ipv4-addr
vlan vlan-id
vrf vrf-name
Command Default
None
Command Modes
Any configuration mode
Command History
Release
6.2(2)
4.0(1)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature using the feature cts command.
This command requires the Advanced Services license.
Examples This example shows how to display the Cisco TrustSec SGT mapping configuration:
switch# show cts role-based sgt-map
IP ADDRESS
5.5.5.5
5.5.5.6
5.5.5.7
5.5.5.8
10.10.10.10
Cisco Nexus 7000 Series Security Command Reference
752
(Optional) Displays a summary of the SGT mappings.
(Optional) Displays the SGT map configuration for
a specific SGT Exchange Protocol (SXP) peer.
(Optional) Displays the SGT map configuration for
a specific VLAN.
(Optional) Displays the SGT map configuration for
a specific virtual routing and forwarding (VRF).
Modification
The summary, sxp peer peer-ipv4-addr, vlan vlan-id, and vrf vrf-name
keywords and arguments were added.
This command was introduced.
SGT VRF/VLAN
5 vlan:10
6 vlan:10
7 vlan:10
8 vlan:10
10 vrf:3
Show Commands
SGT CONFIGURATION
CLI Configured
CLI Configured
CLI Configured
CLI Configured
CLI Configured