Police (Policy Map) - Cisco Nexus 7000 Series Command Reference Manual

P Commands

police (policy map)

To configure policing for a class map in a control plane policy map, use the police command. To remove
policing for a class map in a control plane policy map, use the no form of this command.
police [cir] cir-rate [bps| gbps| kbps| mbps| pps]
police [cir] cir-rate [bps| gbps| kbps| mbps] [bc] burst-size [bytes| kbytes| mbytes| ms| packets| us]
police [cir] cir-rate [bps| gbps| kbps| mbps| pps] conform {drop| set-cos-transmit cos-value|
set-dscp-transmit dscp-value| set-prec-transmit prec-valu e| transmit} [exceed {drop| set dscp dscp table
cir-markdown-map| transmit}] [violate {drop| set dscp dscp table pir-markdown-map| transmit}]
police [cir] cir-rate [bps| gbps| kbps| mbps| pps] pir pir-rate [bps| gbps| kbps| mbps] [[be]
extended-burst-size [bytes| kbytes| mbytes| ms| packets| us]]
no police [cir] cir-rate [bps| gbps| kbps| mbps| pps]
no police [cir] cir-rate [bps| gbps| kbps| mbps| pps] [bc] burst-size [bytes| kbytes| mbytes| ms| packets|
us]
no police [cir] cir-rate [bps| gbps| kbps| mbps| pps] conform {drop| set-cos-transmit cos-value|
set-dscp-transmit dscp-value| set-prec-transmit prec-valu e| transmit} [exceed {drop| set dscp dscp table
cir-markdown-map| transmit}] [violate {drop| set dscp dscp table pir-markdown-map| transmit}]
no police [cir] cir-rate [bps| gbps| kbps| mbps| pps] pir pir-rate [bps| gbps| kbps| mbps| pps] [[be]
extended-burst-size [bytes| kbytes| mbytes| ms| packets| us]]
Syntax Description
cir
cir-rate
bps
gbps
kbps
mbps
pps
bc
burst-size
(Optional) Specifies the committed information rate
(CIR).
CIR rate. The range is from 0 to 80000000000.
(Optional) Specifies units for traffic rates bytes per
second in bits per second.
(Optional) Specifies units for traffic rates in gigabits
per second.
(Optional) Specifies units for traffic rates in kilobits
per second.
(Optional) Specifies units for traffic rates in megabits
per second.
(Optional) Specifies units for traffic rates in packets
per second.
(Optional) Specifies the committed burst size.
Committed burst size. The range is from 1 to
512000000.
Cisco Nexus 7000 Series Security Command Reference
police (policy map)
587