Cisco Nexus 7000 Series Command Reference Manual page 30

absolute
Command Modes
Time-range configuration
Command History
Release
4.0(1)
Usage Guidelines
The device interprets all time range rules as local time.
If you omit both the start and the end keywords, the device considers the absolute time range to be always
active.
You specify time arguments in 24-hour notation, in the form of hours:minutes or hours:minutes:seconds. For
example, in 24-hour notation, 8:00 a.m. is 8:00 and 8:00 p.m. is 20:00.
You specify date arguments in the day month year format. The minimum valid start time and date is 00:00:00
1 January 1970, and the maximum valid start time is 23:59:59 31 December 2037.
This command does not require a license.
Examples This example shows how to create an absolute time rule that begins at 7:00 a.m. on September 17, 2007, and
ends at 11:59:59 p.m. on September 19, 2007:
switch# configure terminal
switch(config)# time-range conference-remote-access
switch(config-time-range)# absolute start 07:00 17 September 2007 end 23:59:59 19 September
2007
Related Commands
Command
periodic
time-range
Cisco Nexus 7000 Series Security Command Reference
4
Modification
This command was introduced.
Description
Configures a periodic time range rule.
Configures a time range for use in IPv4 or IPv6 ACLs.
A Commands