Send-Lifetime - Cisco Nexus 7000 Series Command Reference Manual

send-lifetime

send-lifetime
To specify the time interval within which the device sends the key during key exchange with another device,
use the send-lifetime command. To remove the time interval, use the no form of this command.
send-lifetime [local] start-time [duration duration-value| infinite| end-time]
Syntax Description
local
start-time
duration duration-value
infinite
end-time
Command Default
infinite
Command Modes
Key configuration
Command History
Release
4.0(1)
Usage Guidelines
This command does not require a license.
By default, the device interprets all time range rules as UTC.
By default, the time interval within which the device sends a key during key exchange with another device—the
send lifetime—is infinite, which means that the key is always valid.
The start-time and end-time arguments both require time and date components, in the following format:
Cisco Nexus 7000 Series Security Command Reference
646
(Optional) Specifies that the device treats the
configured times as local times. By default, the device
treats the start-time and end-time arguments as UTC.
Time of day and date that the key becomes active.
For information about the values for the start-time
argument, see the "Usage Guidelines" section.
(Optional) Specifies the length of the lifetime in
seconds. The maximum length is 2147483646 seconds
(approximately 68 years).
(Optional) Specifies that the key never expires.
(Optional) Time of day and date that the key becomes
inactive.
For information about valid values for the end-time
argument, see the "Usage Guidelines" section.
Modification
This command was introduced.
S Commands