Show Running-Config Cts - Cisco Nexus 7000 Series Command Reference Manual

show running-config cts

show running-config cts
To display the Cisco TrustSec configuration in the running configuration, use the show running-config cts
command.
show running-config cts
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any configuration mode
Command History
Release
4.0(1)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature using the feature cts command.
This command requires the Advanced Services license.
Examples This example shows how to display the Cisco TrustSec configuration in the running configuration:
switch# show running-config cts
version 4.0(1)
feature cts
cts role-based enforcement
cts role-based sgt-map 10.10.1.1 10
cts role-based access-list MySGACL
permit icmp
cts role-based sgt 65535 dgt 65535 access-list MySGACL
cts sxp enable
cts sxp connection peer 10.10.3.3 source 10.10.2.2 password default mode listener
vlan 1
cts role-based enforcement
vrf context MyVRF
cts role-based enforcement
Related Commands
Command
feature cts
Cisco Nexus 7000 Series Security Command Reference
882
Modification
This command was introduced.
Description
Enables the Cisco TrustSec feature.
Show Commands