Cisco Nexus 7000 Series Command Reference Manual page 414

ip arp inspection vlan
Usage Guidelines
By default, the device does not log packets inspected by DAI.
This command does not require a license.
Examples
This example shows how to enable DAI on VLANs 13, 15, and 17 through 23:
switch# configure terminal
switch(config)# ip arp inspection vlan 13,15,17-23
switch(config)#
Related Commands
Command
ip arp inspection validate
show ip arp inspection
show ip arp inspection vlan
show running-config dhcp
Cisco Nexus 7000 Series Security Command Reference
388
Description
Enables additional DAI validation.
Displays the DAI configuration status.
Displays DAI status for a specified list of VLANs.
Displays DHCP snooping configuration, including
DAI configuration.
I Commands