Eou Port - Cisco Nexus 7000 Series Command Reference Manual

eou port

eou port
To configure the User Datagram Protocol (UDP) port number for Extensible Authentication Protocol over
UDP (EAPoUDP), use the eou port command. To revert to the default, use the no form of this command.
eou port udp-port
no eou port
Syntax Description
udp-port
Command Default
21862 (0x5566)
Command Modes
Global configuration
Command History
Release
4.0(1)
Usage Guidelines
You must use the feature eou command before you configure EAPoUDP.
This command does not require a license.
Examples This example shows how to change the UDP port number for EAPoUDP:
switch# config t
switch(config)# eou port 21856
This example shows how to revert to the default UDP port number for EAPoUDP:
switch# config t
switch(config)# no eou port
Related Commands
Command
feature eou
show eou
Cisco Nexus 7000 Series Security Command Reference
302
UDP port number. The range is from 1 to 65535.
Modification
This command was introduced.
Description
Enables EAPoUDP.
Displays EAPoUDP information.
E Commands