Cisco Nexus 7000 Series Command Reference Manual page 566

permit (ARP)
This command does not require a license.
Examples This example shows how to enter ARP access list configuration mode for an ARP ACL named arp-acl-01
and add a rule that permits ARP request messages that contain a sender IP address that is within the 10.32.143.0
subnet:
switch# configure terminal
switch(config)# arp access-list arp-acl-01
switch(config-arp-acl)# permit request ip 10.32.143.0 255.255.255.0 mac any
Related Commands
Command
deny (ARP)
arp access-list
ip arp inspection filter
remark
show arp access-list
Cisco Nexus 7000 Series Security Command Reference
540
Description
Configures a deny rule in an ARP ACL.
Configures an ARP ACL.
Applies an ARP ACL to a VLAN.
Configures a remark in an ACL.
Displays all ARP ACLs or one ARP ACL.
P Commands