Monitor Session - Cisco Nexus 7000 Series Command Reference Manual

M Commands

monitor session

To configure an access control list (ACL) capture session in order to selectively monitor traffic on an interface
or VLAN, use the monitor session command.
monitor session session type acl-capture
Syntax Description
session
type
acl-capture
Command Default
None
Command Modes
Global configuration
Command History
Release
5.2(1)
Usage Guidelines
This command does not require a license.
Examples This example shows how to configure an ACL capture session:
switch# configure terminal
switch(config)# monitor session 5 type acl-capture
switch(config-acl-capture)#
Related Commands
Command
access-list capture
destination interface
show ip-access capture session
Session ID. The range is from 0 to 48.
Specifies a session type.
Creates an ACL capture session.
Modification
This command was introduced.
Description
Enables access control list (ACL) capture on all
virtual device contexts (VDCs).
Configures a destination for ACL capture packets.
Displays the ACL capture session configuration.
Cisco Nexus 7000 Series Security Command Reference
monitor session
509