Show Ip Arp Inspection Statistics - Cisco Nexus 7000 Series Command Reference Manual

Show Commands

show ip arp inspection statistics

Use the show ip arp inspection statistics command to display the Dynamic ARP Inspection (DAI) statistics.
You can specify a VLAN or range of VLANs.
show ip arp inspection statistics [vlan vlan-list]
Syntax Description
vlan vlan-list
Command Default
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History
Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples This example shows how to display the DAI statistics for VLAN 1:
switch# show ip arp inspection statistics vlan 1
Vlan : 1
-----------
ARP Req Forwarded
ARP Res Forwarded
ARP Req Dropped
ARP Res Dropped
DHCP Drops
DHCP Permits
SMAC Fails-ARP Req = 0
SMAC Fails-ARP Res = 0
DMAC Fails-ARP Res = 0
IP Fails-ARP Req
Modification
This command was introduced.
= 0
= 0
= 0
= 0
= 0
= 0
= 0
Cisco Nexus 7000 Series Security Command Reference
show ip arp inspection statistics
(Optional) Specifies the list of VLANs for which to
display DAI statistics. Valid VLAN IDs are from 1
to 4096.
787