Ip Verify Source Dhcp-Snooping-Vlan - Cisco Nexus 7000 Series Command Reference Manual

I Commands

ip verify source dhcp-snooping-vlan

To enable IP Source Guard on a Layer 2 Ethernet interface, use the ip verify source dhcp-snooping-vlan
command. To disable IP Source Guard on an interface, use the no form of this command.
ip verify source dhcp-snooping-vlan
no ip verify source dhcp-snooping-vlan
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Interface configuration
Command History
Release
4.0(1)
Usage Guidelines
By default, IP Source Guard is not enabled on any interface.
This command does not require a license.
Examples This example shows how to enable IP Source Guard on an interface:
switch# configure terminal
switch(config)# interface ethernet 2/1
switch(config-if)# ip verify source dhcp-snooping-vlan
switch(config-if)#
Related Commands
Command
ip source binding
show ip verify source
Modification
This command was introduced.
Description
Creates a static IP source entry for the specified
Ethernet interface.
Displays IP-to-MAC address bindings.
Cisco Nexus 7000 Series Security Command Reference
ip verify source dhcp-snooping-vlan
429