Cisco Nexus 7000 Series Command Reference Manual page 734

show accounting log
• Redirect: indicates the configuration change was not issued directly from the Command Line Interface
Fri Sep 27 16:15:08 2013:type=update:id=console0:user=admin:cmd=switchto ; configure terminal
; port-profile type port-channel GANETTI-OKEANOS ; switchport trunk allowed vlan add 71
(REDIRECT)
This command does not require a license.
Examples
This example shows how to display the entire accounting log:
switch# show accounting log
Sat Feb 16 10:44:24 2008:update:/dev/pts/1_172.28.254.254:admin:show system uptime
Sat Feb 16 10:44:25 2008:update:/dev/pts/1_172.28.254.254:admin:show clock
Sat Feb 16 10:45:20 2008:update:/dev/pts/1_172.28.254.254:admin:show logging log
file start-time 2008 Feb 16 10:44:11
Sat Feb 16 10:45:23 2008:update:/dev/pts/1_172.28.254.254:admin:show accounting
log start-time 2008 Feb 16 10:08:57
Sat Feb 16 10:45:24 2008:update:/dev/pts/1_172.28.254.254:admin:show system uptime
Sat Feb 16 10:45:25 2008:update:/dev/pts/1_172.28.254.254:admin:show clock
Sat Feb 16 10:46:20 2008:update:/dev/pts/1_172.28.254.254:admin:show logging log
file start-time 2008 Feb 16 10:45:11
Sat Feb 16 10:46:22 2008:update:/dev/pts/1_172.28.254.254:admin:show accounting
This example shows how to display 400 bytes of the accounting log:
switch# show accounting log 400
Sat Feb 16 21:15:24 2008:update:/dev/pts/1_172.28.254.254:admin:show accounting log start-time
2008 Feb 16 18:31:21
Sat Feb 16 21:15:25 2008:update:/dev/pts/1_172.28.254.254:admin:show system uptime
Sat Feb 16 21:15:26 2008:update:/dev/pts/1_172.28.254.254:admin:show clock
This example shows how to display the accounting log starting at 16:00:00 on February 16, 2008:
switch(config)# show accounting log start-time 2008 Feb 16 16:00:00
Sat Feb 16 16:00:18 2008:update:/dev/pts/1_172.28.254.254:admin:show logging log file
start-time 2008 Feb 16 15:59:16
Sat Feb 16 16:00:26 2008:update:/dev/pts/1_172.28.254.254:admin:show accounting log start-time
2008 Feb 16 12:05:16
Sat Feb 16 16:00:27 2008:update:/dev/pts/1_172.28.254.254:admin:show system uptime
Sat Feb 16 16:00:28 2008:update:/dev/pts/1_172.28.254.254:admin:show clock
Sat Feb 16 16:01:18 2008:update:/dev/pts/1_172.28.254.254:admin:show logging log file
start-time 2008 Feb 16 16:00:16
Sat Feb 16 16:01:26 2008:update:/dev/pts/1_172.28.254.254:admin:show accounting log start-time
2008 Feb 16 12:05:16
Sat Feb 16 16:01:27 2008:update:/dev/pts/1_172.28.254.254:admin:show system uptime
Sat Feb 16 16:01:29 2008:update:/dev/pts/1_172.28.254.254:admin:show clock
Sat Feb 16 16:02:18 2008:update:/dev/pts/1_172.28.254.254:admin:show logging log file
start-time 2008 Feb 16 16:01:16
Sat Feb 16 16:02:26 2008:update:/dev/pts/1_172.28.254.254:admin:show accounting log start-time
2008 Feb 16 12:05:16
Sat Feb 16 16:02:28 2008:update:/dev/pts/1_172.28.254.254:admin:show system uptime
This example shows how to display the last index number:
switch# show accounting log last-index
accounting-log last-index : 1814
This example shows how to display the result of configuration changes:
switch# show accounting log
Fri Mar 15 10:19:58 2013:type=update:id=console0:user=Ciscoadmin:cmd=configure terminal ;
interface Ethernet1/1 (SUCCESS)
Fri Mar 15 10:19:59 2013:type=update:id=console0:user=Ciscoadmin:cmd=configure terminal ;
interface Ethernet1/1 ; shutdown (REDIRECT)
Fri Mar 15 10:19:59 2013:type=update:id=console0:user=Ciscoadmin:cmd=configure terminal ;
interface Ethernet1/1 ; shutdown (SUCCESS)
Cisco Nexus 7000 Series Security Command Reference
708
(CLI) but was issued as a result of another CLI command. For example, the following output is issued
as a result of the port-profile type command:
Show Commands