D Commands
This example shows how to configure the 802.1X transmission-period timeout for an interface:
switch# configure terminal
switch(config)# interface ethernet 1/1
switch(config-if)# dot1x timeout tx-period 45
This example shows how to revert to the default 802.1X transmission-period timeout for an interface:
switch# configure terminal
switch(config)# interface ethernet 1/1
switch(config-if)# no dot1x timeout tx-period
Related Commands
Command
feature dot1x
show dot1x all
Description
Enables the 802.1X feature.
Displays all 802.1X information.
Cisco Nexus 7000 Series Security Command Reference
dot1x timeout tx-period
217