Cisco Nexus 7000 Series Command Reference Manual page 523

M Commands
mac port access-group macacl
switchport
mac packet-classify
switch(config)# interface ethernet 2/3
switch(config-if)# ip port access-group ipacl in
ERROR: The given policy cannot be applied as mac packet classification is enable
d on this port
switch(config-if)#
Related Commands
Command
ip port access-group
ipv6 port traffic-filter
switchport
Description
Applies a IPv4 ACL to an interface as a port ACL.
Applies a IPv6 ACL to an interface as a port ACL.
Configures an interface to operate as a Layer 2
interface.
Cisco Nexus 7000 Series Security Command Reference
mac packet-classify
497