Show Cts Role-Based Sgt Vlan - Cisco Nexus 7000 Series Command Reference Manual

Show Commands

show cts role-based sgt vlan

To display the Cisco TrustSec Security Group Tag (SGT) mapping configuration for a specific VLAN, use
the show cts role-based sgt vlan command.
show cts role-based sgt vlan {all| vlan-id}
Syntax Description
all
vlan-id
Command Default
None
Command Modes
Any configuration mode
Command History
Release
6.2(2)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature using the feature cts command.
This command does not require a license.
Examples This example shows how to display the Cisco TrustSec SGT mapping configuration for all VLANs:
switch# show cts role-based sgt vlan all
Related Commands
Command
feature cts
show cts role-based sgt-map
cts role-based sgt
Displays the configured SGT for all VLANs.
Configured SGT for the specific VLAN. The range
is from 1 to 4094.
Modification
This command was introduced.
Description
Enables the Cisco TrustSec feature.
Displays the global Cisco TrustSec SGT mapping
configuration.
Configures mapping of Cisco TrustSec SGTs to an
SGACL.
Cisco Nexus 7000 Series Security Command Reference
show cts role-based sgt vlan
751