Show Cts Role-Based Disabled-Interface - Cisco Nexus 7000 Series Command Reference Manual

Show Commands

show cts role-based disabled-interface

To display interfaces where Cisco TrustSec security group access control list (SGACL) enforcement policy
is disabled, use the show cts role-based disabled-interface command.
show cts role-based disabled-interface
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any configuration mode.
Command History
Release
8.0(1)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature using the feature cts command.
This command requires the Advanced Services license.
Examples This example shows how to verify that SGACL policy enforcement is disabled on interfaces.
switch# show cts role-based disabled-interface
Ethernet4/5
Ethernet4/17
Related Commands
Command
feature cts
show cts role-based disabled-interface
Modification
This command was introduced.
Description
Enables the Cisco TrustSec feature.
Cisco Nexus 7000 Series Security Command Reference
747