Eou Revalidate (Exec) - Cisco Nexus 7000 Series Command Reference Manual

E Commands

eou revalidate (EXEC)

To revalidate Extensible Authentication Protocol over User Datagram Protocol (EAPoUDP) sessions, use the
eou revalidate command.
eou revalidate {all| authentication {clientless| eap| static}| interface ethernet slot / port| ip-address
ipv4-address| mac-address mac-address| posturetoken name}
Syntax Description
all
authentication
clientless
eap
static
interface ethernet slot/port
ip-address ipv4-address
mac-address mac-address
posturetoken name
Command Default
None
Command Modes
Any command mode
Command History
Release
4.0(1)
Revalidates all EAPoUDP sessions.
Revalidates EAPoUDP sessions for specific
authentication types.
Specifies sessions authenticated using clientless
posture validation.
Specifies sessions authenticated using EAPoUDP.
Specifies sessions authenticated using statically
configured exception lists.
Revalidates the EAPoUDP sessions for a specific
interface.
Revalidates the EAPoUDP sessions for a specific
IPv4 address.
Revalidates the EAPoUDP sessions for a specific
MAC address.
Revalidates the EAPoUDP sessions for a specific
posture token.
Modification
This command was introduced.
Cisco Nexus 7000 Series Security Command Reference
eou revalidate (EXEC)
305