Cisco Nexus 7000 Series Command Reference Manual page 800

show hardware rate-limiter
Release
4.0(3)
4.0(1)
Usage Guidelines
You can use the command only in the default virtual device context (VDC).
This command does not require a license.
Examples This example shows how to display all the hardware rate-limit configuration and statistics:
switch# show hardware rate-limiter
Units for Config: packets per second
Allowed, Dropped & Total: aggregated since last clear counters
Rate Limiter Class
------------------------------------------------------------
layer-3 mtu
layer-3 ttl
layer-3 control
layer-3 glean
layer-3 multicast directly-connected
layer-3 multicast local-groups
layer-3 multicast rpf-leak
layer-2 storm-control
access-list-log
copy
receive
layer-2 port-security
layer-2 mcast-snooping
layer-2 vpc-low
Cisco Nexus 7000 Series Security Command Reference
774
Modification
Added the port-security keyword.
This command was introduced.
Parameters
Config : 500
Allowed : 0
Dropped : 0
Total : 0
Config : 500
Allowed : 0
Dropped : 0
Total : 0
Config : 10000
Allowed : 0
Dropped : 0
Total : 0
Config : 100
Allowed : 0
Dropped : 0
Total : 0
Config : 3000
Allowed : 0
Dropped : 0
Total : 0
Config : 3000
Allowed : 0
Dropped : 0
Total : 0
Config : 500
Allowed : 0
Dropped : 0
Total : 0
Config : Disabled
Config : 100
Allowed : 0
Dropped : 0
Total : 0
Config : 30000
Allowed : 0
Dropped : 0
Total : 0
Config : 30000
Allowed : 0
Dropped : 0
Total : 0
Config : Disabled
Config : 10000
Allowed : 0
Dropped : 0
Total : 0
Config : 4000
Show Commands