Ipv6 Dhcp-Ldra - Cisco Nexus 7000 Series Command Reference Manual

ipv6 dhcp-ldra

ipv6 dhcp-ldra
To enable the Lightweight DHCPv6 Relay Agent (LDRA) feature, use the ipv6 dhcp-ldra command.
ipv6 dhcp-ldra
no ipv6 dhcp-ldra
Syntax Description
This command has no arguments or keywords.
Command Default
Disabled
Command Modes
Global configuration
Command History
Release
7.3(0)D1(1)
Usage Guidelines
To use this command, you must enable the DHCP feature by using the feature dhcp command.
Examples This example shows how to enable the LDRA feature:
switch# configure terminal
switch(config)# feature dhcp
switch(config)# ipv6 dhcp-ldra
This example shows how to disable the LDRA feature:
switch(config)# no ipv6 dhcp-ldra
Related Commands
Command
show ipv6 dhcp-ldra
Cisco Nexus 7000 Series Security Command Reference
438
Modification
This command was introduced.
Description
Displays the configuration details of LDRA.
I Commands