Cisco Nexus 7000 Series Security Command Reference - Cisco Nexus 7000 Series Command Reference Manual

Hide thumbs Also See for Nexus 7000 Series:

Table of Contents

Syntax Description

sequence-number

(Optional) Sequence number of the deny command,

which causes the device to insert the command in that

numbered position in the access list. Sequence

numbers maintain the order of rules within an ACL.

A sequence number can be any integer between 1 and

By default, the first rule in an ACL has a sequence

number of 10.

If you do not specify a sequence number, the device

adds the rule to the end of the ACL and assigns a

sequence number that is 10 greater than the sequence

number of the preceding rule.

Use the resequence command to reassign sequence

numbers to rules.

Name or number of the protocol of packets that the

rule matches. For details about the methods that you

can use to specify this argument, see "Protocol" in the

"Usage Guidelines" section.

Source IPv4 addresses that the rule matches. For

details about the methods that you can use to specify

this argument, see "Source and Destination" in the

"Usage Guidelines" section.

Destination IPv4 addresses that the rule matches. For

details about the methods that you can use to specify

this argument, see "Source and Destination" in the

"Usage Guidelines" section.

Cisco Nexus 7000 Series Security Command Reference