Clear Dot1X - Cisco Nexus 7000 Series Command Reference Manual

clear dot1x

clear dot1x
To clear 802.1X authenticator instances, use the clear dot1x command.
cleardot1x{all| interface | slot/port}
Syntax Description
all
interface ethernet slot/port
Command Default
None
Command Modes
Any command mode
Command History
Release
4.0(1)
Usage Guidelines
You must use the feature dot1x command before you configure 802.1X.
This command does not require a license.
Examples This example shows how to clear all 802.1X authenticator instances:
switch# clear dot1x all
This example shows how to clear the 802.1X authenticator instances for an interface:
switch# clear dot1x interface ethernet 1/1
Related Commands
Command
feature dot1x
show dot1x all
Cisco Nexus 7000 Series Security Command Reference
78
Specifies all 802.1X authenticator instances.
Specifies the 802.1X authenticator instances for a
specified interface.
Modification
This command was introduced.
Description
Enables the 802.1X feature.
Displays all 802.1X information.
C Commands